#machining, #roughing, #cyberbeat, #turning, #ASMR, #satisfying
Deep hole drilling. 1/4" hss drill 11" long in 4140 steel.
Sumitomo 3" DMSW hifeed .079"DOC 98ipm (drawing 103% spindle load on 25hp spindle)#hifeed, #sumitomo
#deepbore, #clearance, #precision, #fearisnotmyguide 15.4" length 7.872 bore 266rpm × 1.48ipm.
heavy roughing 4140 steel with CNMG 432 in kcp 25C grade. .200" pass .017" inches per Rev. #roughing
aftermath
#HIFEED long extension milling 4140 steel up to machine max feed rate of 196.85ipm
#synchrotap 380+ holes later with a used osg spiral flute tap in 4140 steel plate.
#machinist, #iscar, #4340steel, #boring, #roughing
Sumitomo hifeed milling. 4340 steel. Big plus spindle. YCM 2110B. #Machinist
OSG rigid tapping with #synchro er32 holder and ometa hightap cutting lube. #fitforaking
Rocking out to Falling Through the Sky by Fit for A King while C-sinking these 5/8"NC tap dr holes
#FitForAKing, #fallingthroughthesky, #heavymetal, #iscarSumoCham, #Moddrill iscar Sumocham moddrill
#warofages, #misery, #drillfix, #screech, #indexable, #cncmill, #drilling. 1.0" drill fix drilling.
#CNCBROACHING, #MILLING, making a blind keyway.
E-bore 15.5" fine boring. #e-bore, #metalcore, #smoothcuts
4340 steel spline milling #warofages, #WOA, #CNCmilling
#satisfying #turningsteel #makingchips 4140 rough turning in the manual lathe
e-bore KM80 fine boring gray cast iron in YCM TV2110B CNC mill
initial spindle run in temp check. #bigenough, #YCMTV2110, #6000RPM can't wait to start milling !
3vz-fe head facing
Sumitomo Wez 3" facemill in 4140 steel 800sfm .004" per tooth. #WarOfAges, #Sumitomo
e-bore 3.875" bore in mild steel plate. 600 rpm .004ipr. .010" #e-bore, #apocalypsis, #WarOfAges
Sumitomo Wez 3" facemill / shoulder mill #Sumitomo #WEZ #WarOfAges
sumitomo hifeed milling 4140 steel #hifeed, #heavymetal, #warofages
Jasper
X
About
Tags